Acc #120

I/O Control Boards

1 x PCI

Now only $142.5

The first PCI board has six output relays that allow you to switch up to six separate 10A electric circuits (lights, motors, electric door locks, horns, etc.) upon movement in predetermined user-defined areas.  It also allows you to individually control up to sixteen Speed Dome cameras (must all be utilizing the same protocol and baud rate)

The second board (not inserted into a specific slot type) allows you to connect up to sixteen burglar alarm system motion detectors, magnetic switches, smoke detectors, etc.  You can concurrently share those input devices with your existing burglar alarm system.  Hardware motion detection tends to be much more reliable than DVR software detection due to fast changing lighting conditions, mostly caused by incoming sunlight.

 Acc #125

PTZ Control Board

1 x PCI

Now only $67.50

This PCI card allows you to individually control up to sixteen Speed Dome PTZ cameras (must all be utilizing the same protocol and baud rate)

To obtain much more functions and still be allowed to control speed dome PTZ cameras, choose Accessory #120 instead.

 Acc #135

PTZ Control Box w/ 3-Axis Joystick

20 x 30 cm

Now only $203

This unit allows you to control up to 255 speed dome PTZ or zoom cameras via various RS-485 protocols at speeds of 2400, 4800 or 9600 baud rate.  The baud rate you select must match the baud rate set on the cameras.

Our speed dome cameras #450 and #460 can both make use of this unit, allowing for most of the camera features to be controlled remotely.

Now only $7.50

The alternative is to link the DVR card to one of the USB ports at the back of your PC's casing, via this adapting cable.

Now only $375

This is an add-on to any of our DVR kits.  If you have a POS (point-of-sale = PC cash register) in which you would like to transmit the transaction texts over your live (locally / remotely) video feeds and/or recorded video clips, you would place this POS Text Inserter unit between your POS machine and its receipt printer (serial or parallel).  If you have multiple POS stations, you would need one POS Text Inserter unit per POS station.

Now only $225

This is an add-on to accessory #160.  If your POS machine does not run under Windows or it is not part of a LAN (local area network), then you will need this interface card in the DVR PC for it to communicate with the POS text inserter unit. 

If you have multiple POS stations, you would need one such interface card per four POS stations (up to 4 interface cards for up to 16 POS stations). 

Now only $112.5

This software license allows you to add transactional text onto your surveillance video feeds without the need to purchase additional hardware (such as accessories #160 and #165), but only if your POS (point of sale) machines are Windows-based and all linked via a LAN (local area network).  If you have multiple POS stations, you would need one software license per POS station.  Multiple licenses purchase may be subject to a lower price.

Now only $48

This vari-focal auto-iris lens is ideal in a small room where you want to have a wide angle of view, in order to see the entire room at once.  Can alternatively be utilized for narrow corridors or for any other standard applications where a zoom range is needed.

This lens can be adjusted for a viewing angle of 25 ~ 90 degrees.

Now only $57

This vari-focal auto-iris lens is ideal for low light environment. 

This DC lens will add some light, acting somewhat like an infrared lamp.

This lens can be adjusted for a viewing angle of 36 ~ 75 degrees.

Now only $16.50

This vari-focal manual lens is ideal for most indoor use. 

With this lens, you can set the camera to either auto-adjust the iris (video driven) or to keep a fixed auto-iris (useful when pointing to a wall with windows).

This lens can be adjusted for a viewing angle of 36 ~ 75 degrees.

Now only $30

This vari-focal auto-iris lens can be utilized for indoor or outdoor viewing. 

Ideal for when you expect a lot of change in light condition over the entire day.  So, for outdoor viewing, we recommend auto-iris.

This lens can be adjusted for a viewing angle of 36 ~ 75 degrees.

Now only $28.50

This vari-focal manual lens is ideal for corridors. 

With this lens, you can set the camera to either auto-adjust the iris (video driven) or to keep a fixed auto-iris (useful when pointing to a wall with windows).

This lens can be adjusted for a viewing angle of 18 ~ 48 degrees.

Now only $40.50

This vari-focal auto-iris lens can be utilized for indoor or outdoor viewing. 

Ideal for when you expect a lot of change in light condition during the entire day.  One good application would be to watch a long street alley.

This lens can be adjusted for a viewing angle of 18 ~ 48 degrees.

Now only $67.50

This vari-focal auto-iris lens can be utilized for indoor or outdoor viewing.  This lens can be adjusted for a viewing angle of 5 ~ 48 degrees.

One good application would be to capture license plates of stopped cars, provided there is enough light or plate light not burned.  Can see a license plate up to approximately 60' away.

Now only $100.5

This vari-focal auto-iris lens can be utilized for indoor or outdoor viewing.  This lens can be adjusted for a viewing angle of 3 ~ 57 degrees.

One good application would be to capture license plates of stopped cars, provided there is enough light or plate light not burned.  Can see a license plate up to approximately 100' away.

Acc #320

Tiny Camera Mount Bracket

Metal

Now only $3.75

Metal mount bracket mostly for bullet cameras, although it can be utilized with box cameras when space is limited.

Especially useful for tight areas where a plastic mount bracket would be too big. 

It's a good idea to purchase both, this one and #330, should one fit better than the other  for a specific application. 

Acc #330

Camera Mount Bracket

Plastic

Now only $3.75

ABS plastic mount bracket for box cameras, such as #120 thru #136. 

Especially useful in open-space areas where it's size would not be cumbersome. 

It's a good idea to purchase both, this one and #320, should one fit better than the other  for a specific application. 

Acc #340

L-Shape Camera Mount Bracket

Now only $8.25

Very sturdy metallic mount bracket for any indoor box cameras. 

This is the very best mount you can use for box cameras because of the swivel ability it has.

Also, very useful in areas hard to reach.

Acc #350

Camera Housing Mount Bracket

Outdoor

Now only $9

Sturdy outdoor metal mount bracket for standard outdoor camera enclosures. 

Comes complete with phillips head screws, but it is best to purchase hexadecimal screws for better performance.

Perfect holder for the outdoor camera housing listed below, #420. 

Acc #360

Dome Camera Wall Mount Bracket

Outdoor

Now only $22.50

Sturdy weatherproof metal wall mount bracket for standard outdoor dome cameras.  The cables of the camera pass through the inside of this bracket so as to protect the cables from vandalism.  Comes complete with mounting screws.

Perfect holder for the outdoor dome cameras.  Ask for compatibility as not all dome cameras have the same mounting scheme.

Acc #370

I.R. Dome Camera Wall Mount Bracket

Outdoor

Now only $43.50

Sturdy weatherproof metal wall mount bracket for outdoor I.R. dome cameras.  The cables of the camera pass through the inside of this bracket so as to protect the cables from vandalism.  Comes complete with mounting screws.

This bracket is meant for use with camera #375.  See our cameras webpage ...

Acc #380

Pole Mount Bracket for Speed Domes

Outdoor

Now only $48

Sturdy outdoor metal mount bracket for any of our speed dome cameras. 

Can be mounted on metallic poles of up to 3" in diameter. 

It's high price is partly due to its limited production scale.

Acc #385

Corner Mount Bracket for Speed Domes

Outdoor

Now only $52.50

Sturdy outdoor metal mount bracket for any of our speed dome cameras. 

Can be mounted at the corner of two meeting outdoor walls with an angle of 90 degrees. 

It's very high price is partly due to its limited production scale.

Acc #420

24 VAC Heated Camera Housing w/ fan

Outdoor

Now only $30

This weatherproof outdoor camera housing is made of high quality and rugged materials.  Comes complete with the necessary screws, and wires plug. 

The power needed to operate the heater and fan is minimal.  You will need either a 24 VAC power adapter or a central 24 VAC power supply unit, depending on the number of housings you will be installing.

Acc #450

Ceiling Embedded Camera Housing

Indoor

Now only $18

This camera housing is ideal to protect any of your box (rectangular) cameras through the ceiling. 

It will protect the camera and its wiring as well as give it a nice look.

Now only $4.88

This wall power supply is utilized to feed most of our cameras, except the night vision infrared cameras which requires a higher amperage.  This power supply adapter is regulated.  If you wanted to make use of your own power supply adapter, please make sure that the peak voltage doesn't exceed 13 volts.  Most power adapters on the market are not regulated and will likely yield over voltages.  Please note that this low cost power adapter tends to lose its voltage strength over time.  Accessory #530 is a better choice. 

Now only $12

This wall power adapter is utilized to feed any of our cameras, even our night vision infrared cameras which naturally use more current.  If you wanted to make use of your own power supply adapter, please make sure that the peak voltage doesn't exceed 13 volts.  Most power adapters on the market are not regulated and will likely yield over voltages.  For very long wire runs, we suggest you purchase a more powerful power supply, such as one of our power supply box units.

Now only $6

This wall power adapter is utilized to feed the fan and heater element of the outdoor housing above.  You can also opt to power the camera you insert into the housing with it as well. 

Actually, any of our box cameras make use of either 12 VDC or 24 VAC.  There is less voltage loss over long run of wires when using 24 VAC instead of 12 VDC. 

Now only $13.50

This wall power adapter is utilized to feed the fan and heater element of the outdoor housing above.  You can also opt to power the camera you insert into the housing with it as well. 

Actually, any of our box cameras make use of either 12 VDC or 24 VAC.  There is less voltage loss over long run of wires when using 24 VAC instead of 12 VDC. 

Now only $67.50

This central power supply distribution box unit is utilized in commercial applications especially when combo video/power cabling runs are passed.  Ideal for power hungry infrared cameras.

Each channel is independently fused in case of short circuit or reverse polarity connections during installation.

Now only $93

This central power supply distribution box unit is utilized in commercial applications especially when combo video/power cabling runs are passed.  Ideal for power hungry infrared cameras.

Each channel is independently fused in case of short circuit or reverse polarity connections during installation.

Now only $43.50

This central power supply distribution box unit is utilized in commercial applications especially when combo video/power cabling runs are passed. 

Each channel is independently fused in case of short circuit or reverse polarity connections during installation.

Now only $75

This central power supply distribution box unit is utilized in commercial applications especially when combo video/power  cabling runs are passed. 

Each channel is independently fused in case of short circuit or reverse polarity connections during installation. 

Now only $37.50

This central power supply distribution box unit is utilized in commercial applications especially when combo video/power  cabling runs are passed. 

Each channel is independently fused in case of short circuit or reverse polarity connections during installation.

Now only $63

This central power supply distribution box unit is utilized in commercial applications especially when combo video/power  cabling runs are passed. 

Each channel is independently fused in case of short circuit or reverse polarity connections during installation. 

Now only $10.50

Single-channel video adapter that allows you to use Ethernet (Cat5e or Cat6) cable instead of costly CCTV coax cable.

With this video balun, you can place your camera at a greater distance from the DVR, up to 1300 feet away.  

Now only $0.45

Twist-on BNC connector for sliding in at both ends of your coax RG59 cables.  1) Cut and remove the outer jacket of the coax cable at about 3/4” from the cable end.  2) Bend the copper braid in half.  At that point, half the inner cable should be visible and the other half covered with copper braid.  3) Cut and remove the outer jacket of the inner cable at about ¼” inch.  4) Push the BNC connector onto the stripped cable end while turning it clockwise.  You may need to give it some extra torque using a wrench, but if you do, do not force it. 

Now only $0.75

This adapter allows you to achieve many different things:

• To use your home-based cameras equipped with an RCA connector cable

• Convert an audio BNC jack (as found on our high-end eDVR cards) into an RCA jack .

Now only $0.60

DC power lead for linking your cameras to your 18-gauge wiring runs.  Otherwise, you'll have to cut off the camera's DC plug and twist the two wires together. 

Not a good idea if you ever need to exchange,  return or sell the camera later on. 

Now only $8.25

15 meters (50') of pre-made 22-gauge video cable w/ a bonded wire pair for power supply connection. 

Both ends of the cable comes with pre-made BNC and DC connectors for fast hookup.

Now only $15

30 meters (100') of pre-made 22-gauge video cable w/ a bonded wire pair for power supply connection. 

Both ends of the cable comes with pre-made BNC and DC connectors for fast hookup.

Now only $102

150 meters (500') of video coax cable w/ an 18-gauge bonded wire pair for power supply connection. 

The cable has a signal rating of 150 meters (500 feet).  So, you should not lose your video signal at that length of cabling.

This item only ships within the USA.

Now only $102

150 meters (500') of video coax cable w/ an 18-gauge bonded wire pair for power supply connection. 

The cable has a signal rating of 150 meters (500 feet).  So, you should not lose your video signal at that length of cabling. 

This item only ships within the USA.

Now only $204

300 meters (1000') of video coax cable w/ an 18-gauge bonded wire pair for power supply connection.  The cable has a signal rating of 150 meters (500 feet). 

If you need to place some cameras at more than 150 meters away from the recorder, please contact us for alternative cable.   This item only ships within the USA.

Now only $204

300 meters (1000') of video coax cable w/ an 18-gauge bonded wire pair for power supply connection.  The cable has a signal rating of 150 meters (500 feet). 

If you need to place some cameras at more than 150 meters away from the recorder, please contact us for alternative cable.  This item only ships within the USA.

Now only $15

This is an add-on to any of our cameras.  You can install this tiny circuit board near a camera or anywhere else where it can be hidden, such as under a counter, etc...  This microphone is quite sensitive, reaching voices even at some distances.  This microphone is especially useful if you have multiple audio channels via the DVR card.  Otherwise, you would simply use a regular PC microphone and have the eDVR software pick up the sound from that audio source.

Now only $75

This is very useful especially for DSL internet access where the I.P. address is dynamic, meaning it keeps changing every time you log on to the internet. 

Cable access doesn't change as often, perhaps only once every 3 months or so.  The alternatives are either a static I.P. address from your Internet Service Provider or an I.D. code that is meant to be utilized with any of our eDVR kits. 

$Call

This professional monitor can be utilized as your DVR server VGA monitor, or as a stand-alone security monitor allowing you to connect any CCTV camera directly to it via BNC connection.  The latter is especially useful upon the installation of your cameras.  It allows you to better position the cameras and adjust the focal length and focus painlessly while the monitor is close to the camera location.  This monitor is suitable for a 4/8-channel DVR system.

600:1 contrast

$Call

This professional monitor can be utilized as your DVR server VGA monitor, or as a stand-alone security monitor allowing you to connect any CCTV camera directly to it via BNC connection.  The latter is especially useful upon the installation of your cameras.  It allows you to better position the cameras and adjust the focal length and focus painlessly while the monitor is close to the camera location.  This monitor is suitable for an 8/16/32-channel DVR system.

600:1 contrast

Now only $45

This rugged twin arms swivel bracket is a great solution for when you need to mount your LCD monitor directly onto a wall instead of on an office desk should you run out of room on your desk top. 

Make sure you safely insert the screws through wall studs, or else you use adequate metallic drywall anchors.  The cheap and small plastic anchors won't do the job.